Enter a search term above and hit enter



  • High resolution blending and warping 1920x1200 per output
  • Black level adjustment & colour correction
  • Geometric correction for off-axis projection & stacking
The GB-200 is a powerful and intuitive image blending and warping processor that provides the ability to merge overlapping edges of two or more projected images creating a seamless single image in minutes.

Each GB-200 is equipped with two channels and is positioned inline between the input source (PC) and the projector. It has the ability to pre-cut a single image to form a seamless picture of up to a 2x2 projection array, making your installation quicker and easier. With the help of a multi output graphic card, more complex arrays are not a barrier for the GB-200.

Resolutions including 1080p and WUXGA are supported via VGA, DVI and HDMI connections. Colour, black level and gamma correction are included to take on the challenges faced when blending multiple projectors.

Edge blending using GB-200 to pre-cut the image

Input source
HDMI splitter
Clone source
Output source

Edge Blending from a PC with a multi-output Graphics card to pre-cut image

PC + multi-output graphic card.

Image Stacking

Double your image brightness without significantly increasing your installation cost; with warp adjustment, you can achieve any brightness you want.

Image stacking permits flexible installations and greater redundancy; an image can be displayed without interruption while swapping lamps. Alternatively, images can be realigned to be perfectly square if aligned beyond the lens shift range.

Advanced grid point adjustment for flat and curved surfaces

.The software tool allows up to 17 x 17 grid points of adjustment
.Each point can be individually adjusted with sub-pixel precision.
.Curved screens and complex surfaces are effortlessly covered.

Black Level Uplift

Advanced black level uplift with RGB and HSL correction allows you to accurately match both the outside and overlapped areas in order to achieve a perfect seamless image when the lighting environment is very low.

Multi-Region Colour Correction

Advanced multi region colour correction allows you to adjust the white points of two projected images to make a seamless image.


Output resolution (per channel) XGA60Hz, WXGA60Hz, 1080p 30/50/60Hz* and WUXGA 60Hz
AP: Support Win 7 OS
I/O Connectors Power Switch
HDMI Input x 2, DVI-D x 2 (Supporting HDCP)
HDMI Output x 2,VGA Output x 2
Control Interface: LAN control x 2 ports, via LAN hub Static IP.
RS-232 for control x 1 (For debugging only)
Power supply interface :DC 19V power portx1
Operating Noise 26 dB (typical) / 28 dB (Max )
Power Consumption AC 100 ~ 240V,50/60Hz / 32W -110VAC (Power Adapter)
Dimensions (W x D x H) / Weight 42.85 cm x 19.85 cm x 4.35 cm/ 1.9 Kg (4.185 pounds)
Accessories: Power cable, External Power Supply, User Manual / QSG / software CD (Manual blend/warp tool), Rack-mount ears.
* Output resolution and timing will vary depending on the configuration of projectors in your project. When using GB-200 to pre-cut the image the maximum resolution is 1080p 30Hz.
For more information, please refer to the user manual.
  1. Power switch
  2. RS232 1 (for service only)
  3. HDMI Out 1
  4. VGA Out 1
  5. IP address adjustment 1
  6. RJ45 1
  7. HDMI In 1
  8. DVI In 1
  1. RS232 2 (for service only)
  2. HDMI Out 2
  3. VGA Out 2
  4. IP address adjustment 2
  5. RJ45 2
  6. HDMI In 2
  7. DVI In 2

Recently viewed

This website uses cookies to give you the best online experience. If you'd like to know more or change your preferences, our Cookie Policy explains more.You consent to our cookies if you continue to use our website.